FX1N-20MR Programmable Controller Relay Module DC24V 12 In 8 Out Analog 1AD+1DA Industrial Control Board relay Output

ModulesModule Function:This module is programmable control, can achieve thousands of functions, stable and reliable working performance, built-in watchdog timer circuit, to ensure that the module for a long time to run!!!Some of the common features are shown as follows:Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds.When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.When the signal 1 has a signal, the relay 1 is closed, the relay 2 is disconnected; when the signal 2 has a signal, the relay 1 is turned off, and the relay 2 is closed.Can be connected to the NPN sensor signal, the sensor signal programming, to achieve arbitrary control of the relay.When the signal 1 is triggered, the relay 1 is controlled, and when the signal 2 is triggered, the relay 2 is controlled.Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.When the signal 1 has a signal, the motor is controlled to rotate; when the signal 2 has a signal, the motor is reversed.These are just some examples, modules can achieve far more than these functionsInput high speed pulse C235, C251 and FX1N compatible.Output relay 1A output, Rated current 5A, can directly drive solenoid valve, AC solenoid valve, AC contactor, AC motor, etc,.Specification:Model: FX1N-20MROutput type: relay outputInput point: 12Output point: 8Power Supply: DC10-28VWorking Voltage: DC24V, AC220VAnalog input: 1ADAnalog output: 1DAMemory capacity: 2,000Support stepper motor, text screen, touch scree.Program software: Gx developer, Gx works2Installation method: Using 4pcs M3 screws.Precautions for use:The with two programming port. The 232 interface, you can directly use the USB-232 serial port with a computer to download the program directly. The TTL interface.Built-in Analog input AD, corresponding to internal data register D5030.(Not D8030)Built-in Analog output DA, corresponding to internal data register D5101.When the need to connect with the touch screen or text, can be used to connect 232 programming port.Assistant RelayNormal UseM0 - M383Hold After Power OffM384-M1535Special UseM8000-M8255StateHolding UseS0-S999Timer100MST0-T19910MST200-T2451MST246-T249100MS accumulationT250-T255Counter16-bitC0-C15(0-32767)16-bit(Hold After Power Off)C16-C199High Speed(Hold After Power Off)C200-C255Data Register16-bitD0-D12716-bit(Hold After Power Off)D128-D502916-bit Special Use(AD)D5030(Output Voltage: 0-10V)16-bit Special Use(DA)D5101(Output Voltage: 0-3.3V)==========is_customized : YesModel Number : FX1N-20MR

• Modules
• FX1N-20MR Programmable Controller Relay Module DC24V 12 In 8 Out Analog 1AD+1DA Industrial Control Board relay Output