EVERSECU 360W PoE Uninterruptible Power Supply - 12V/52V Dual Output for CCTV Camera & IP Camera & Access Control, 4-Port PoE + 6-CH 12V DC Power, Support Backup Battery & Multi-Protection

360W PoE Uninterruptible Power Supply for CCTV/PoE IP Cameras & Access ControlModel: CP360W-PoE4P-B | All-in-one power solution with 24/7 uninterrupted protection✅ 360W High-Power Dual Output: DC12V (30A max) for CCTV/Access Control, DC52V (2.3A) for PoE IP Cameras✅ Zero-Delay Backup: 2 parallel lead-acid batteries (CN2 terminal) for no downtime during power outages✅ 8-Layer Protection: Overvoltage/Short Circuit/Overtemperature/Battery Reverse Connection protection✅ 4-Port PoE Expansion: IEEE802.3af/at compliant, 250m long-distance transmission✅ Global Compatibility: 90-264VAC input (47-63Hz) works with all regional power gridsIntelligent Lead-Acid Battery Management🔋 Supported Battery: 2 parallel lead-acid batteries (connected via CN2 terminal)🔋 Multi-Stage Charging: Trickle → Constant Current → Floating charge (prevents overcharge/over-discharge)🔋 Low Voltage Protection: Auto-cutoff when battery <10V (red LED alert) + reverse connection protectionKey Technical Specifications🔌 Input SpecificationsInput Voltage: 90-264VAC (115/230VAC Nominal) | Works with global power grids (47-63Hz)⚡ Output SpecificationsDC12V Output: 11.4-12.6VDC (30A Nominal, 32A Max) - for CCTV/Access Control systemsDC52V PoE Output: 50.44-53.56VDC (2.3A Nominal, 2.5A Max) - for PoE IP Cameras📏 Physical Dimensions & WeightDimensions (L×W×H): 370 × 340 × 95 mm | 14.6 × 13.4 × 3.7 inchesNet Weight: 4.8 kg | 10.58 lbs (10.6 lbs)🌡️ Operating ConditionsMTBF: ≥10,000 Hours (@25℃ / 77°F, Full Load)Operating Temperature: -10℃ ~ 50℃ | 14°F ~ 122°FLED Status Indicators🟢 Green (AC_ON): AC power active🟡 Yellow (BAT_ON): Battery powering system (AC disconnected)🔵 Blue (BAT_CHG): Solid=Constant charging | Flashing=Floating charge | Off=Fully charged🔴 Red (Low Battery): Battery <10V or disconnectedOptional Expansion & Easy Installation🔌 PoE Module: 4×100Mbps PoE ports + 2×100Mbps uplink RJ45 (30W max/port, VLAN/Extend modes)🔌 12V Sub-Board: 6×Camera ports (3A PTC) + Access Control terminals (0-45s unlock delay)🔌 Input: IEC 320 C13 plug / HB9.5mm terminals | Output: HB8.25mm (12V) + CN5 (PoE)Reliability & Compliance✅ Safety & Compliance: RoHS Compliant | Flame-retardant housing | Insulation Resistance ≥10MΩ | Dielectric Strength 1.5KVdc (1min)✅ Compact Design: 14.6"×13.4"×3.7" (10.6 lbs) | Ideal for 24/7 surveillance & access control systems

• Tailored for CCTV & POE IP Cameras: Specifically designed to power CCTV cameras, POE IP cameras, and access control systems. Dual output (12V 30A + 52V 2.3A) matches the power needs of surveillance devices, ensuring stable operation for 24/7 security monitoring.
• 4-Port POE & 6-CH 12V Expansion: Equipped with 4 POE ports (supports IEEE802.3af/at) for POE IP cameras, plus an optional 12V sub-board with 6 independent ports for CCTV cameras. 250m long-distance POE transmission fits outdoor/indoor surveillance layouts.
• 8-Layer Full Protection for Devices: Features overload, overheat, short circuit, overvoltage, and battery over-discharge protection. Each 12V port has PTC protection, shielding valuable surveillance equipment from electrical damage.
• Stable Performance for 24/7 Use: ≥70% efficiency with low ripple/noise (≤3% of output voltage) to avoid interference with camera signals. Operates in -10℃~50℃ temperature range, reliable for long-term security monitoring.
• Easy Installation & Status Monitoring: Universal AC input (90-264VAC) via plug or terminals, no professional wiring required. LED indicators (AC/battery/charging/low battery) let you check power status at a glance, simplifying maintenance.
• RoHS Compliant & Durable Design: Meets RoHS standards, free of hazardous substances. Flame-retardant housing and MTBF ≥10,000 hours (25℃ full load) ensure long service life for continuous security protection.