Back Fat Measure Tester - Veterinary Backfat Measurement Device, Livestock Pig Back Fat Thickness Meter, 1-3 Layer Fat Thickness, 4-35mm Range, Measurement Time <10s, for Farms

★ Product Description:The Back Fat Measuring Instrument Measures The Thickness Of Three Layers Of Back Fat In Mammals. The Measurement Range Is 4~35mm. It Measures Backfat Thickness In Ten Seconds Or Less And Displays The Result Automatically.★ Note1. This Instrument Is Not Waterproof And Cannot Be Immersed In Water.2. Does Not Contain Couplant, Customers Need To Prepare By Themselves.3. During Installation, Connect The Probe And Wires, And The Wires And Instrument, Then Press And Rotate Until Locked.4. For Safety Reasons, Please Be Sure To Unplug The Charger Before Use.★ Product Specification:Product Name: Back Fat Measure TesterThickness Measured: 3 Layers Of Back FatBack Fat Measurement Time: <10 SecondsMeasurement Range And Error: 4-35mm ± 1mmPower Supply: Built-In Rechargeable Lithium BatteryProduct Size/Weight: 18.3*7.6*2. 7cm/600g★ Packing List:Back Fat Measure Tester *1Probe Line *1Charger *1Instruction Manual *1

• ★ Product Description: The Back Fat Measuring Instrument Measures The Thickness Of Three Layers Of Back Fat In Mammals. The Measurement Range And Error Is 4-35mm ± 1mm. It Measures Backfat Thickness In Ten Seconds Or Less And Displays The Result Automatically.
• ★ 1-3 Layer Fat Thickness: There Are Three Lights On The Left Side Of The Display. The First Light Shows 1 Layers Of Back Fat, And The First And Second Lights Show 2 Layers Of Back Fat. The Three Lights Are Illuminated With 3 Layers Of Back Fat. If The Skin Thickness Is Less Than 3 Mm, The Skin Thickness Is Included In The Reading. If The Skin Thickness Is Greater Than 3 Mm, The Skin Will Be Counted As One Layer Of Back Fat.
• ★ Note: This Instrument Is Not Waterproof And Cannot Be Immersed In Water. During Installation, Connect The Probe And Wires, And The Wires And Instrument, Then Press And Rotate Until Locked. For Safety Reasons, Please Be Sure To Unplug The Charger Before Use.
• ★ Accurate Measurement: A Certain Amount Of Coupling Agent (Coupling Agent Not Included In The Packaging), Is Applied To The Test Site To Make The Probe Well Coupled To The Skin, Gently Press/Rotate To Expel Air Bubbles Between The Skin And The Probe. The Probe Must Be Held Perpendicular To The Back. Tilting The Probe May Cause Errors.
• ★ Power Supply: Built-In Rechargeable Lithium Battery, The Instrument Is In A Non-Working State And Cannot Be Used While Charging Is In Progress. If No Measurement Is Taken For 2 Minutes, The Instrument Will Automatically Disconnect The Power. This Way, Even If The Instrument Is Placed Upside Down On The Table And The Button Is Pressed, It Will Not Continue To Discharge. Improved Safety And Extended Battery Life